my new toy

[jfkenpoman]

hi darren i have got an attachment for the harris, it is a small rectangular pice of metal i think its part number is 6a. it has a 5 or 6mm grub screw at one end and the bipod attachment at the other. On the hw100 gun stock there are 2 recessed screws one at front one at rear, do i remove the front one and replace with the mount, hope this makes some sense

[jfkenpoman]

yes les the interview well very well, graham is a nice bloke, he's even put a .17hmr on my ticket !!!! went to see farmer last night after teaching, asking if its ok to use on his land, he;s signed the paperwork. ended up bailing hay with him till 10.30 in the pouring rain. hope your holiday is going well hi to lisa as well

[Lez325]

Im pleased for you Jon- as you said Graham (the FEO) is a nice bloke and he gave you HMR too, top result - look forward to my invite to shoot your land now then hint hint (17 HMR of course)

best start looking for an HMR now then

Regards


Les

[TaffyGun]

Originally Posted by jfkenpoman

hi darren i have got an attachment for the harris, it is a small rectangular pice of metal i think its part number is 6a. it has a 5 or 6mm grub screw at one end and the bipod attachment at the other. On the hw100 gun stock there are 2 recessed screws one at front one at rear, do i remove the front one and replace with the mount, hope this makes some sense

The recessed screws sound like action screws fella and I wouldn't fix to those as they could work the action screws loose through usage and affect accuracy.
With mine I carefully drilled the stock to fit QD studs - one in the butt of the stock and one in the forend and attached the pod directly to the QD stud It is much more sturdy that way and you can position the QD stud for better balance of your rifle on the pod then too HTH